-
NT Series Pressure Sensor Core
NT series pressure sensor core adopts leading technology which uses two pieces of MEMS silicon wafers for challenging measuring requirements and general industrial applications in the mid and high pressure ranges. Its manufacturing process is to bond the PCB board on the diaphragm surface of the sensor after the integrated pressure diaphragm is packaged. Subsequently, the bonding process is used to connect the two pieces of MEMS silicon wafers to the PCB board, so that it can output the signal.
-
DP1300-DP Series Differential Pressure Transmitter
DP1300-DP Series differential pressure transmitter is used to measure the liquid level, density, pressure, and flow of liquid, gas or steam, and then convert it into a 4-20mADC HART current signal output.DP1300-DP Series differential pressure transmitter can also communicate with HART375 hand-held Parameter setting, process monitoring, etc. This sensor module adopts all welding technology and has an integrated overload diaphragm, an absolute pressure sensor, a temperature sensor and a differential pressure sensor inside. The protection level of this product can reach IP67.
-
DP1300-M Series Gauge or Absolute Pressure Transmitters
DP1300-M gauge pressure/absolute pressure transmitter is used to measure liquid level, density and pressure of liquid, gas or steam, and then convert it into 4～20mADC HART current signal output. DP1300-M can also be used with RST375 handheld terminal or RSM100 Modems communicate with each other, through them for parameter setting, process monitoring, etc. The absolute pressure sensor is only installed on the high pressure side of the sensor diaphragm box as a reference value for static pressure measurement and compensation.
-
ST Series Sheathed Thermocouple
ST series sheathed thermocouple is especially suitable for installation in temperature measurement occasions where the pipeline is narrow, curved and requires rapid response and miniaturization.It has the advantages of slender body, fast thermal response, vibration resistance, long service life and easy bending. Sheathed thermocouple is usually used in conjunction with display instruments, recording instruments, electronic computers and etc. It can directly measure liquid, steam, gas medium and solid surface with temperature in the range of -200℃～1500℃ in various production processes.It is widely used in petrochemical, electric power, metallurgy and other industries.
-
ST Series Ex Temperature Transmitter
ST series Ex transmitter is specially designed to prevent explosion when measuring temperature.It uses the principle of gap explosion-proof to design components such as junction boxes with sufficient strength, and seal all parts that generate sparks, arcs and dangerous temperatures in the junction box. When an explosion occurs in the box, it can be extinguished and cooled through the gap of the joint surface, so that the flame and temperature after the explosion cannot be transmitted to the outside of the box, so as to achieve explosion-proof.
-
ST Series Temperature Transmitter
ST series transmitter is specially designed for temperature measurement.The transmitter converts the measured temperature into an electrical signal. The electrical signal enters the A/D converter through the isolated module of the transmitter. After multi-level compensation and calibration of the data by the microprocessor, the corresponding analog or digital signal is output and displayed on the LCD module. The FSK modulation signal of the HART protocol is superimposed on the 4-20mA current loop through the modulation and demodulation module.
-
DG Series Hammer Union Pressure Transmitter
DG series hammer union pressure transmitter is especially suitable for pressure measurement of viscous medium (mud, crude oil, concrete liquid, etc.). This kind of transmitter can resist strong blows and vibrations, according to high precision, high reliability. This type of transmitter is Senex’s state of the art hammer union pressure transmitter with industry exclusive features that were developed in direct response to requests from the field.
-
DG2XZS Series Pressure Transmitter For Injection Molding Machine
DG2XZS series pressure transmitter is especially designed for injection molding machine, metal balers, metal forming machines, and it can also be used in some other machinery manufacturing industries. This kind of transmitter also uses MEMS Bicrystal silicon and ntegrated structure of 17-4PH stainless steel measuring diaphragm, thus ensuring its high stability and high precision.
-
DG2 Series Pressure Transmitter for Refrigeration
DG2 series pressure transmitter for refrigeration adopts high-precision and high-stability MEMS chip, with ntegrated structure of 17-4PH stainless steel measuring diaphragm which is made by the world’s leading transmitter technology.After intelligent temperature compensation in the whole temperature area, the transmitter has the characteristics of excellent performance, compact structure, small size, fast response speed, convenient installation, wide temperature resistance range, anti-condensation and high media compatibility.
-
DG Series Pressure Transmitter For Hydrogen Application
This type of DG series pressure transmitter is especially designed for hydrogen measurement and different applications including hydrogen engines, hydrogen refuelling, hydrogen fuel cells, marine vehicles, laboratory environments. We choose special metal materials originating from the United States, which are specially designed to resist hydrogen embrittlement and hydrogen permeation. Not only is it versatile and environmentally friendly, but also provides the same great performance and stability we’re known for.
-
DG2 Hydraulic Pressure Transmitter
DG2 series hydraulic pressure transmitters are manufactured on a large scale by using MEMS Bicrystal technology and digital compensation amplifier circuits. In the temperature range of -40~125℃, after digital temperature compensation, its temperature drift characteristics can meet the needs of most industrial applications.
